Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Pix 506 issue: OWA is not working out of the firewall when att changed ip's

ATT changed the IP's and now i am unable to see OWA outside of the firewall. Please let me know if there is any settings i can change in the firewall that would make OWA work.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Pix 506 issue: OWA is not working out of the firewall when a

Please post a sanitized config and we'll be able to help.

4 REPLIES
Hall of Fame Super Silver

Re: Pix 506 issue: OWA is not working out of the firewall when a

You do not give much detail for us to work with. I would assume from the description that you give that there was probably an address translation and some access rules that would translate some outside address to the inside address of the OWA server and permit connections to be made to it. When ATT changed the address it is probably the case that you need to revise the static translation and the access rules to translate a new address to the OWA server inside address and permit access to it.

HTH

Rick

New Member

Re: Pix 506 issue: OWA is not working out of the firewall when a

You are correct Rick,

The Internet provider changed my ip and the only thing i did was change the ip address in the translation rules with the new ip i got from the Internet provider. At this point i am able to see OWA from my network, but when trying from outside the network it is unavailable.

Thank you for your quick reply.

Eddi

Re: Pix 506 issue: OWA is not working out of the firewall when a

Please post a sanitized config and we'll be able to help.

New Member

Re: Pix 506 issue: OWA is not working out of the firewall when a

After changing the outside IP address did you clear the translation of the old public IP to private IP?

Trying doing:

"clear xlate" or "clear xlate global ".

148
Views
0
Helpful
4
Replies
CreatePlease login to create content