Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 506 Wont boot, power and ACT LED off, Network LED Flashing

Hi

I have a PIX 506 (not 506e) with OS 6.3.3. It stopped working today and I tried reseating all cables and powering back up. All that happens is the Network LED flashing and the Power and ACT LED's are off. The fan comes on immediatley. I have not hooked to the console with a laptop yet. When I turn the power button on the back all 3 LED's flicker but only the Network LED remains lit while the other two remain off. I have reseated the memory and nothing else. It is plugged into a UPS. Any ideas as I am no expert and need help bad.

thanks doug

2 REPLIES

Re: PIX 506 Wont boot, power and ACT LED off, Network LED Flashi

can u connect the console and capture its output when you power cycle it? It might be a bad hw.

New Member

Re: PIX 506 Wont boot, power and ACT LED off, Network LED Flashi

Hello

this has ben resolved it turned out to be a funky actiing external power supply. changed that and all came back fine. Heard the power supply on the 506 are notorious for this after a few years of service.

thanks doug

655
Views
0
Helpful
2
Replies
CreatePlease to create content