Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

PIX 506

here are some facts:

- power led OFF

- ACT led OFF

- network led flashing

- Ethernet --> Lan (traigt trough cable) ACT flashing and 2 other ON

(traigt trough cable)

-unable to ping from Lan

- can connect using a laptop from the router

- unable to connect using a console cable

any idea?

1 REPLY
Bronze

Re: PIX 506

I think its fine if you are unable to ping to a PIX's interface when ping is from LAN and to an interface not connected to same LAN. Check the console cable and see if you have given proper settings for console connection. Following link may help you

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094465.shtml

111
Views
0
Helpful
1
Replies
CreatePlease to create content