Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Pix 506e - 1721 connection problem

Hi all,

I need to change my border router to a 1721 with one sdsl and one adsl

interface. This then connects to a pix 506e but the 1721 has been

configured with public ip's on the wan's (each ip is from a different

range) they are then nated on the fa to a private ip.

My problem - is that the pix 506e has a public ip and is configured to

deal with various operations which need a public ip. So the fa int on

the router needs to have a public ip and no nat.

someone has suggested virtual int's on both pix and router ??

is this possible ?

Many Thanks

Alex

ps Ive posted the config from the router

1 REPLY
Silver

Re: Pix 506e - 1721 connection problem

It will be better if you do NAT on PIX and not on the router.This way you can put the fa interface of router on a public ip address and connect this to the PIX. I don't think using virtual interfacs will solve your problem.

113
Views
0
Helpful
1
Replies
CreatePlease to create content