Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 506E configuration/setup?

Hello everyone---

I am just starting at a company that has a PIX 506E box. I have never used a Cisco PIX box before. I am trying to connect to it to see what the configuration is. However, the instructions say to go to https://192.168.1.1/startup.html but our subnet is 192.168.168.xxx. I have connected a laptop directly to the "console" port on the PIX, but no luck.

Apologies in advance, for my lack of understanding in using the PIX. My prior experience with VPN is with Windows Server and with firewalls is with OpenBSD boxes.

Thanks for all your help!

1 REPLY

Re: PIX 506E configuration/setup?

Hi ..

The document you are referring applies to the firewall "out of the box" .. the one you have sounds like it has already been configured correct ..? the only option if you don't know IP addressing is by using the console port. You might also need to "crack" the passwords if you don't know it ..please check the below links

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml#pix_without

I hope it helps .. please rate helpful posts

335
Views
0
Helpful
1
Replies
CreatePlease login to create content