Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX-506E on Lan to Lan VPN can't access PDM

So I have a L2L vpn tunnel up between a PIX 506E and a PIX 515E

When i try to load https://pix-506E from user connected to PIX-515E i can't access to it.

I believe i need to apply an ACL to PIX-506E to allow PIX-515E on port 8080.

Can you pleae help me with the config?

PIX-506E

inside 172.25.1.1

outside x.x.x.x

PIX-515E

inside 172.16.1.1

outside g.g.g.g

5 REPLIES
New Member

Re: PIX-506E on Lan to Lan VPN can't access PDM

I figured it out.

I have to enable hhtp on the pix

http 172.16.1.0 255.255.255.0

Re: PIX-506E on Lan to Lan VPN can't access PDM

Ezequiel,

You can change the port number by:-

http server enable xx

xx=new port number.

To allow remote access

http x.x.x.x y.y.y.y <>

x.x.x.x = ip subnet

y.y.y.y = subnet mask

so something like

http 172.16.1.0 255.255.255.0 inside

HTH.

Re: PIX-506E on Lan to Lan VPN can't access PDM

only in ver 7x/8x can you change the port number.

New Member

Re: PIX-506E on Lan to Lan VPN can't access PDM

Thank you for the info.

One more thing, looks like it opens PDM

but is been 5 minutes and says

LOADING PIX DEVICE MANAGER. PLEASE MAIT with an hour glass.

Any clues?

New Member

Re: PIX-506E on Lan to Lan VPN can't access PDM

bahh Java version.

Downgraded, got it open.

Thank you,

Zeek

196
Views
0
Helpful
5
Replies