06-28-2007 07:19 AM - edited 03-11-2019 03:37 AM
I'm trying to upgrade my PDM from V3.0(2) to V3.0(3), this is supposed to resolve some issues of connecting to the PDM with newer versions of Java.
Below is the syntax I'm typing in during a hyperterminal session. Obviously it isn't working. Can someone give me the correct syntax?
Copy tftp //tftp-root/pdm-304.bin flash pdm
Solved! Go to Solution.
06-28-2007 07:26 AM
Try using following command syntax-
PIX# copy tftp flash:pdm
Address or name of remote host []? x.x.x.x
Source file name [mybackup]? pdm-303.bin
copying tftp://x.x.x.x/pdm-303.bin to flash:pdm
[yes|no|again]? yes
Assuming that x.x.x.x is the IP address of your TFTP server and pdm-303.bin is the image name.
Hope this helps.
Regards,
Vibhor.
06-28-2007 07:26 AM
Try using following command syntax-
PIX# copy tftp flash:pdm
Address or name of remote host []? x.x.x.x
Source file name [mybackup]? pdm-303.bin
copying tftp://x.x.x.x/pdm-303.bin to flash:pdm
[yes|no|again]? yes
Assuming that x.x.x.x is the IP address of your TFTP server and pdm-303.bin is the image name.
Hope this helps.
Regards,
Vibhor.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide