Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

PIX 515 and VLANs

I have a PIX 515 with 3 FE's (DMZ included). I have a switch behind the DMZ interface where the servers are connected to.

What I would like to do is to have 2 VLANs (1 for MGMT and 1 for Data), so I can manage the switch in a separate VLAN.

Question is whether I can do that, and what the sample configs would look like.

Thanks.

3 REPLIES
Hall of Fame Super Blue

Re: PIX 515 and VLANs

Community Member

Re: PIX 515 and VLANs

Thanks.

Looks like I'll need to use dot1q trunking. It's a 3Com 4200 switch which claims that it does support. I need to make sure that the PIX can support that.

Hall of Fame Super Blue

Re: PIX 515 and VLANs

Hi

Don't know bout the 3com's but 802.1q is an industry standard and this is encapsulation that the pix uses so as long as the 3com is not doing something "different" than the standard you should be okay.

HTH

Jon

139
Views
0
Helpful
3
Replies
CreatePlease to create content