Cisco Support Community
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

pix 515 failure

my pix failed and this is what I have

Use BREAK or ESC to interrupt flash boot.

Use SPACE to begin flash boot immediately.

Reading 1962496 bytes of image from flash.

imgsum_config: sumval(0x3e9f) md5(0x96a6bc99 0xfdcbe539 0x38a4f658 0x28d53468)

imgsum_verify: chksum(0x0 ) md5(0x04a70f1b 0x70b19178 0x3fceeab5 0xd0ae764e)

Checksum verification on compression loader failed.

what is this? I tried to raload image but problem is the same

Community Member

Re: pix 515 failure

Did you try to re-download the image from the Cisco website (or a newer version)? Maybe the image got corrupted...

What version is that?

Community Member

Re: pix 515 failure

6.3.5. I didn't try to redownload it, hmmmm .... will try

Community Member

Re: pix 515 failure

I just tried lower version 6.2.2 and problem is the same

Community Member

Re: pix 515 failure

I have the same problem with 2 pix 515 units. It all started when I tried to upgrade the license to VPN-Triple DES.

I've tried loading 5.2.9, 6.2.4 and 6.3.5 all with the same error: checksum verification of flash image failed

I've tried erasedisk.bin. This erased as expected, but when I load the OS I get the same problem.

Any help would be greatly appreciated...

Community Member

Re: pix 515 failure

well I've sent my unit to be repaired .... so will see .... and let you know

CreatePlease to create content