Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Pix 515 & source routing

Hi All ,

I have a sort of design question.

We have the following need .

A configuration with multiple internet access , 2 different ISP , and a PIX 515 ( ios 7.2) with 3 NIC .

The question is , is it possible to configure the PIX to route different protocols to the appropriate ISP connection ?

The configuration would be as follow

external IF 1 ---- ISP1

external IF 2 -----ISP2

internal IF ----- LAN

The configuration should allow , for example , to route smtp traffic to isp2 and http traffic to isp1 .

SHould one link fail all the traffic should flow through the other IF

thanaks

1 REPLY

Re: Pix 515 & source routing

Stefano,

I know you can have 2 x ISP connections and use them for failover, but I do not think that the PIX can perform policy-based routing.

HTH>

222
Views
0
Helpful
1
Replies
CreatePlease to create content