I have a Pix515E with 6.3 images. I want to connect two ISP with that PIX, at my PIX default route is specified towards the ISP1 and as per the policy I can not put default route at PIX and at the same time my client should get the internet.
Suppose my VLAN 100 is VLAN for my Internal Network that need to be use the ISP2 and VLAN 101 is for my Clients they should used the ISP1
How do I configure the PIX to serve this scenario?
I am sendind the a attachment please look into that.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...