Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

PIX 515E interfaces

Hi,

we are using the PIX 515E in our network with differenent version of IOS 6.3,7.0 and 7.2

sometimes we are getting some unwanted packets through the IPSEC VPN established between our branch office which increaases the CPU load on my PIX

can any one suggest how we can find the interface load or utlization or packet per second in PIX 515E

1 REPLY
Gold

Re: PIX 515E interfaces

you can use something like mrtg or prtg (or any other bandwidth monitor) to monitor either the PIX interface directly using snmp or monitor the switchports that the PIX is connected to. either one will work. You should monitor each interface of the PIX if you're going to go through the trouble of monitoring.

299
Views
0
Helpful
1
Replies
CreatePlease to create content