03-12-2008 10:09 AM - edited 03-11-2019 05:16 AM
We have 2 PIX 515E's, and all of a sudden the memory has begun to run out very fast. According to the Cisco website, the RAM on the PIX should not change much, if any at all.
We have tried all possible means to ensure there is no DoS being carried out. Are there any further steps we can take to look into this matter?
One of the firewalls memory takes about 24 hours to run out, and then we have to perform a reload to reduce its memory. The other one seems to be stable at present, but when it starts to misbehave, it also requires a reboot every 2-3 days.
Any ideas welcome
Thanks
Ali
Solved! Go to Solution.
03-13-2008 09:39 AM
Hey Ashish
Thank you so much for solving my case, i really appreciate your dedication and enthusiasm on this case.
All the best
Regards,
Ali
03-13-2008 10:18 AM
np
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide