Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

pix 515e natting to inside host

i want to nat public ip to a host on local network.

i want to give http(web) access to this host from outside.

can i do this from ASDM?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: pix 515e natting to inside host

Sure you can do it in asdm that's why is there for ,  try to get use to  doing in it through pix  command line .

Assume server IP is  10.10.10.1 and Public IP 20.20.20.1 , for web access default HTTP port is  tcp  port  80

pix515>

pix515>enable

pix515#config t

pix515(config)#

static (inside,outside)   netmask 255.255.255.255

that is:
pix515(config)#static (inside,outside)  20.20.20.1 10.10.10.1  netmask 255.255.255.255

then inbound access rule

access-list  extended permit tcp any host eq

that is :

pix515(config)#access-list  outside_access_in extended permit tcp any host 20.20.20.1 eq 80

I have not seen ASDM example  ,  you still could use  link bellow  as reference

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080862017.shtml

1 REPLY

Re: pix 515e natting to inside host

Sure you can do it in asdm that's why is there for ,  try to get use to  doing in it through pix  command line .

Assume server IP is  10.10.10.1 and Public IP 20.20.20.1 , for web access default HTTP port is  tcp  port  80

pix515>

pix515>enable

pix515#config t

pix515(config)#

static (inside,outside)   netmask 255.255.255.255

that is:
pix515(config)#static (inside,outside)  20.20.20.1 10.10.10.1  netmask 255.255.255.255

then inbound access rule

access-list  extended permit tcp any host eq

that is :

pix515(config)#access-list  outside_access_in extended permit tcp any host 20.20.20.1 eq 80

I have not seen ASDM example  ,  you still could use  link bellow  as reference

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080862017.shtml

164
Views
0
Helpful
1
Replies
CreatePlease to create content