Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX-525 not Accessiable by PDM

Dear,

we have PIX-525, below show version, wenever I am opening using the browser I am getting certificate ERROR and massege " Laoding PIX devise manager. Please wait.." an d I keep waiting for long time but it didnt open. anyone can help

Thanks

PIX-525-XYZ# show version

Cisco PIX Firewall Version 6.3(4)

Cisco PIX Device Manager Version 3.0(2)

Compiled on Fri 02-Jul-04 00:07 by morlee

PIX-525-XYZ up 166 days 10 hours

Hardware:   PIX-525, 256 MB RAM, CPU Pentium III 600 MHz

Flash E28F128J3 @ 0x300, 16MB

BIOS Flash AM29F400B @ 0xfffd8000, 32KB

Encryption hardware device : VAC+ (Crypto5823 revision 0x1)

Licensed Features:

Failover:                    Enabled

VPN-DES:                     Enabled

VPN-3DES-AES:                Disabled

Maximum Physical Interfaces: 8

Maximum Interfaces:          12

Cut-through Proxy:           Enabled

Guards:                      Enabled

URL-filtering:               Enabled

Inside Hosts:                Unlimited

Throughput:                  Unlimited

IKE peers:                   Unlimited

This PIX has an Unrestricted (UR) license.

Serial Number: 809281426 (0x303ca792)

Running Activation Key: 0xbe7b1ca0 0x3108ae44 0xba7fff66 0x3560c149

Configuration last modified by enable_15 at 00:11:48.570 UTC Wed Oct 26 2011

1 REPLY
Purple

PIX-525 not Accessiable by PDM

Hi,

post config and verify your PC clock is correct and  the same as the Pix.

Try also with another browser.

Regards.

Alain

Don't forget to rate helpful posts.
252
Views
0
Helpful
1
Replies
CreatePlease to create content