Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 525 not booting

Hi everyone!

I have a PIX 525 that sometimes is not booting, it got locked in this part of the bootin process:

CISCO SYSTEMS PIX FIREWALL

Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73

Compiled by morlee

128 MB RAM

PCI Device Table.

Bus Dev Func VendID DevID Class Irq

00 00 00 8086 7192 Host Bridge

00 07 00 8086 7110 ISA Bridge

00 07 01 8086 7111 IDE Controller

00 07 02 8086 7112 Serial Bus 9

00 07 03 8086 7113 PCI Bridge

00 0B 00 8086 1229 Ethernet 10

00 0D 00 8086 1209 Ethernet 11

00 0E 00 8086 1209 Ethernet 10

00 11 00 8086 1229 Ethernet 11

00 13 00 8086 1229 Ethernet 5

The last time i had to disconected the cables from the interfaces and it booted but i'm not sure what could be the reason of the problem...

Thanks in advance...

1 REPLY

Re: PIX 525 not booting

Hi,

If you have any additional interfaces, maybe one of the cards is failing the boot test.

For example the problem might be with the ethernet5 or the next one checked in the boot process.

You can try to remove the card and plug it back in.

Please rate if this helped.

Regards,

Daniel

104
Views
0
Helpful
1
Replies