Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIX 525 write standby issue

Hi

When I execute write standby command from primary PIX it is not copying one particular command line to the standby secondary PIX the command is "nat (inside) 0 access-list inside_nat0_acl"

even after rebooting secondary PIX I am having this issue. Other than that it is copying rest of the recent config changes.

Can anyone help me out how to fix this problem. Is it a known bug. If so , can I execute this command to the secondary PIX directly.

My IOS version is

Cisco PIX Security Appliance Software Version 7.2(1)

Cheers,

Siva

  • Firewalling
3 REPLIES
New Member

Re: PIX 525 write standby issue

Is the forum dead.

New Member

Re: PIX 525 write standby issue

Hey maybe..

Well, can you please post sh failover output? You might have some other issues.

Thanks

New Member

Re: PIX 525 write standby issue

Here is the show failover output...

svhm-pix# sh failover

Failover On

Cable status: Normal

Failover unit Secondary

Failover LAN Interface: N/A - Serial-based failover enabled

Unit Poll frequency 6 seconds, holdtime 18 seconds

Interface Poll frequency 5 seconds, holdtime 25 seconds

Interface Policy 1

Monitored Interfaces 9 of 250 maximum

failover replication http

Version: Ours 7.2(1), Mate 7.2(1)

Last Failover at: 09:12:50 AEST Feb 22 2009

This host: Secondary - Active

Active time: 45544392 (sec)

Interface outside (0.0.0.0): Normal

Interface inside (0.0.0.0): Normal

Interface dmz-svhm (0.0.0.0): Link Down (Waiting)

Interface dmz-remote (0.0.0.0): Normal (Waiting)

Interface dmz-vpn-internal (0.0.0.0): Link Down (Waiting)

Interface dmz-vpn-external (0.0.0.0): Normal

Interface dmz-unimelb (0.0.0.0): Normal

Interface HealthSmart (0.0.0.0): Normal (Waiting)

Interface RVEEH-Network (0.0.0.0): Normal

Other host: Primary - Standby Ready

Active time: 426 (sec)

Interface outside (0.0.0.0): Normal

Interface inside (0.0.0.0): Normal

Interface dmz-svhm (0.0.0.0): Link Down (Waiting)

Interface dmz-remote (0.0.0.0): Normal (Waiting)

Interface dmz-vpn-internal (0.0.0.0): Link Down (Waiting)

Interface dmz-vpn-external (0.0.0.0): Normal

Interface dmz-unimelb (0.0.0.0): Normal

Interface HealthSmart (0.0.0.0): Normal (Waiting)

Interface RVEEH-Network (0.0.0.0): Normal

Stateful Failover Logical Update Statistics

Link : failover Ethernet7 (up)

Stateful Obj xmit xerr rcv rerr

General 4514681071 0 515801583 17442707

sys cmd 7558147 0 7558121 1

up time 0 0 0 0

RPC services 0 0 0 0

TCP conn 3166567303 0 441149517 11257278

UDP conn 1290642575 0 58911176 6185292

ARP tbl 49805761 0 8179969 136

Xlate_Timeout 0 0 0 0

VPN IKE upd 11222 0 1164 0

VPN IPSEC upd 96063 0 1636 0

VPN CTCP upd 0 0 0 0

VPN SDI upd 0 0 0 0

VPN DHCP upd 0 0 0 0

Logical Update Queue Information

Cur Max Total

Recv Q: 0 25 538002965

Xmit Q: 0 9 4640587425

svhm-pix#

326
Views
0
Helpful
3
Replies