Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

pix 7 static routing

- I have network 10.10.0.0/17 routed to int17

- I want to route one addr, 10.10.10.10/32 to interface 32

but traffic for 10.10.10.10 is sill going through int17. When I ping 10.10.10.10 from fw, it is routed ok.

wtf is going on?

5 REPLIES

Re: pix 7 static routing

Make sure route for 10.10.10.10/32 has a lower metric than 10.10.0.0/17 route

Please post the output of

sh run route

Regards

New Member

Re: pix 7 static routing

it has lower metric.

Re: pix 7 static routing

try issuing following commands

cl xlate

cl arp

cl route

New Member

Re: pix 7 static routing

well it is plan B, system is in production, so I'd like to avoid this clear arp and clear xlate operation

Re: pix 7 static routing

I see. Please post the output of following commands

sh run route

packter-tracer input inside tcp anipaddressinside 3389 10.10.10.10 3389 detailed

Regards

202
Views
0
Helpful
5
Replies
CreatePlease login to create content