I recently had to make some changes on a pix firewall that seperates two seperate internal subnets and now I cannot ping from the inside to the outside subnet. I openned up PPTP and cleaned up some other things that I didn't think were needed and may have cleaned up to much. The pix does not seperate the inside from the outside internet but only seperates one internal network from another. I use to be able to ping from the inside (secured) network to the outside (unsecured) network servers but not any more. Any help would be appreciated. Here is a sanitized copy of my configuration. Thanks.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...