Hi,
We are using IPsec b/w site to site (Bangalore A and US B).We need to configure Bangalore PIX for VPN Connection also from Bangalore A to Cheenai C (Site to client).What would be the configuration? Whether this PIX Version 6.3(4) will support.
The site to site configuration is as follows.
crypto ipsec transform-set strong esp-des esp-sha-hmac
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto map BLR 20 ipsec-isakmp
crypto map BLR 20 match address 102
crypto map BLR 20 set peer 209.10.209.56
crypto map BLR 20 set transform-set strong
crypto map BLR interface outside
isakmp enable outside
isakmp key A3L791-10BLU-2 address 209.10.209.56 netmask 255.255.255.255
isakmp identity address
isakmp nat-traversal 20
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash sha
isakmp policy 20 group 1
isakmp policy 20 lifetime 86400
telnet 10.1.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
username xxx password xxx encrypted privilege 15
terminal width 80
Cryptochecksum:xxx