i have two DSL Modems & Two Different Networks. i want that both Network traffic should be filtered through One Firewall means two in & two out ethernet Ports. Please help me that which firewall series i should use for it. Please reply me Soon.
The 525 has a lot of ports to choose from. Physically you have 2 and you can add up to at least 3 more fiber connections via an add-on card (probably 6 b/c there are dual cards out there).
This design has a single point of failure. If the firewall goes down you are hosed on both networks.
If you don't have much traffic the 501's are pretty cheap these days, relatively speaking. If this is a big production network then you may consider getting 2 of the 525's and running one in passive/failover mode. You do not need a full license for that one, it reads its config off of the other one and takes over when the first one fails.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...