Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX Message Code

What is the PIX Message code for when the config or policy has been changed on a PIX firewall?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: PIX Message Code

It could be 111002 or 111008 ,this code at least indicates the following:

111002

Error Message %PIX-5-111002: Begin configuration: IP_address writing to device

Explanation This message is logged when you enter the write command to store your configuration on a device (either floppy, Flash memory, TFTP, the failover standby unit, or the console terminal). The IP_address indicates whether the login was made at the console port or via a Telnet connection.

111008

Error Message %PIX-5-111008: User user executed the command string

Explanation This syslog message is for accounting purposes. The user entered a command that modified the configuration.

http://www.cisco.com/en/US/docs/security/pix/pix63/system/message/pixemsgs.html

Rgds

Jorge

1 REPLY

Re: PIX Message Code

It could be 111002 or 111008 ,this code at least indicates the following:

111002

Error Message %PIX-5-111002: Begin configuration: IP_address writing to device

Explanation This message is logged when you enter the write command to store your configuration on a device (either floppy, Flash memory, TFTP, the failover standby unit, or the console terminal). The IP_address indicates whether the login was made at the console port or via a Telnet connection.

111008

Error Message %PIX-5-111008: User user executed the command string

Explanation This syslog message is for accounting purposes. The user entered a command that modified the configuration.

http://www.cisco.com/en/US/docs/security/pix/pix63/system/message/pixemsgs.html

Rgds

Jorge

251
Views
0
Helpful
1
Replies