Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX NAT and port forwarding

I have installed and new spam filter between the firewall and mail server. I am now using port forwarding. The outgoing traffic for mail is being stamped with my Pix address instead of the mail address. Some of the mail is being rejected becasue the pix outside address has no rDNS. Is there a way to make the out going mail use the mail server external address instead if the PIX external address.

static (inside,outside) tcp x.x.x.10 www x.x.x.37 www netmask 255.255.255.255

static (inside,outside) tcp x.x.x.10 https x.x.x.37 https netmask 255.255.255.255

static (inside,outside) tcp x.x.x.10 pop3 x.x.x.37 pop3 netmask 255.255.255.255

static (inside,outside) tcp x.x.x.10 smtp x.x.x.43 smtp netmask 255.255.255.255

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: PIX NAT and port forwarding

Use this command and this should resolve your issue:

nat (inside) 10 x.x.x.43

global (outside) 10 x.x.x.10

1 REPLY
New Member

Re: PIX NAT and port forwarding

Use this command and this should resolve your issue:

nat (inside) 10 x.x.x.43

global (outside) 10 x.x.x.10

184
Views
0
Helpful
1
Replies