I have a PIX 515E, power went out over the weekend and the UPS went down also, I came in this morning, I try ping the firewall and it fail, when I reboot the PIX and connect to the console this is all I get from it.
CISCO SYSTEMS PIX FIREWALL
Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73
Compiled by morlee
32 MB RAM
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 7192 Host Bridge
00 07 00 8086 7110 ISA Bridge
00 07 01 8086 7111 IDE Controller
00 07 02 8086 7112 Serial Bus 9
00 07 03 8086 7113 PCI Bridge
00 0D 00 8086 1209 Ethernet 11
00 0E 00 8086 1209 Ethernet 10
00 11 00 8086 1229 Ethernet 11
It is like this for the pass 2 hr. Can anyone tell me why this I am getting this and the PIX not booting up as norm..