Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX OSPF network statement syntax

IOS OSPF network statements use a wildcard mask. It appears from the documentation that PIX OS uses a normal (non-wildcard) mask. Is that correct? Seems odd to me. Thanks in advance for any assistance.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: PIX OSPF network statement syntax

Yes Jone.. This is right.. PIX and ASA's use subnet masks for OSPF... Not really sure of the background, but i guess this is what is there ....

You can have a look at this URL, for a configuration example of OSPF in both router and PIX...

http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804acfea.shtml#conf

Hope this helps.. all the best.. rate replies if found useful..

Raj

2 REPLIES

Re: PIX OSPF network statement syntax

Yes Jone.. This is right.. PIX and ASA's use subnet masks for OSPF... Not really sure of the background, but i guess this is what is there ....

You can have a look at this URL, for a configuration example of OSPF in both router and PIX...

http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804acfea.shtml#conf

Hope this helps.. all the best.. rate replies if found useful..

Raj

New Member

Re: PIX OSPF network statement syntax

Raj, Thank you...that clears it up for me...John

121
Views
0
Helpful
2
Replies
CreatePlease login to create content