PIX port redirection

[albertobrivio42]

Dear All,

I've got problem with PIX515E port redirection: I can't reach a router by telnet and a linux machine by ssh.

I've attached a doc document containings layout and configuration.

Regards

Alberto Brivio

[vitripat]

Hi ..

I went through your configuration and it seems that 217.19.X.Y is the IP address on outside interface of PIX. If this is correct, try following commands-

clear static

static (inside,outside) tcp interface 2022 192.168.0.2 2022

static (inside,outside) tcp interface 23 192.168.1.2 23

clear access-list acl-inbound

access-list acl-inbound permit icmp any any

access-list acl-inbound permit tcp any interface outside eq 2022

access-list acl-inbound permit tcp any interface eq 23

access-group acl-inbound in interface outside

no sysopt noproxyarp outside

clear xlate

Hope this helps.

Regards,

Vibhor.