Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX replaced by ASA 5505

I have replaced my pix with an asa 5505. All seems to be working properly, except when I log into the ASA, I have a constantly scrolling screen that looks like a log file. It looks like the firewall is in 'debug' mode or something...I have removed it from service, brought it to my desk, logged in and it's normal. When i put it back in place, the constantly scrolling screen of 'teardowns' and other things. I have an 1841 router that the firewall connects to. any advice would be greatly appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: PIX replaced by ASA 5505

I would start with...

undebug all

and

no logging console

4 REPLIES
Green

Re: PIX replaced by ASA 5505

You are seeing this in ASDM or cli?

New Member

Re: PIX replaced by ASA 5505

In the CLI interface. I'm not able to log in remotely, only from the console port. I was going to log in via the console port and correct my ssh access, but I can't cause when I DO log in via the console port, i see a constant scrolling screen that looks like logging or perhaps a debug screen.

Green

Re: PIX replaced by ASA 5505

I would start with...

undebug all

and

no logging console

New Member

Re: PIX replaced by ASA 5505

Thanks acomiskey! That corrected the problem! I appreciate the input!

193
Views
0
Helpful
4
Replies
CreatePlease to create content