PIX to PIX IPsec Tunnel & Routing internal Subnets

[pramod]

Hi Experts,
I have a requirement to form IPsec tunnel between PIX and advertise my internal networks over the tunnel.
I have two sites
site A internal : 10.1.0.0/16
site B internal : 10.0.0.0/8
My question is if both site fall under the same range how communication happen after tunnel formed?
can someone help me with sample config to address this issue please ?

10.1.0.0/16 [A] --->pix--192.168.1.1----192.168.1.2--pix---10.0.0.0/8
please let me know how cryptomap defined for access list as well
Thanks,
Pramod

[Panos Kampanakis]

You can do site to site VPN with overlapping local ip addresses as explained here http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080b37d0b.shtml

What you do is translate the address ranges and match them in the crypto ACL.

I hope it helps.

PK