Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

pix to pix vpn tunnel behind nat

Hey all

two pix 525s. One on each side of a t1.

Set up looks like this:

Pix---Router---T1---Router---Pix

One of the routers is set up with a private address on the inside (which then connects to a pix on a private address).

How do I get that pix to set up a tunnel?

(I have done many tunnels when both sides are public IPs)...I just don't know how to traverse the nat.

3 REPLIES
New Member

Re: pix to pix vpn tunnel behind nat

Are these your routers? or are they managed by someone else?

New Member

Re: pix to pix vpn tunnel behind nat

they are mine.

Lets try with this example:

Router Outside: 4.1.1.1

router Inside: 10.1.1.1

Pix Outside 10.1.1.2

pix Inside: 192.168.1.1

New Member

Re: pix to pix vpn tunnel behind nat

343
Views
0
Helpful
3
Replies
CreatePlease to create content