Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX with 2 HTTP Routes

My PIX currently has this statement:

static (inside,outside) tcp 74.74.74.74 www 192.168.10.5 www netmask 255.255.255.255 0 0

now I also want my box at 192.168.10.6 to be hittable with the real IP 74.74.74.75

yet I keep getting an "overlaps with" error out of the PIX when I issue the command to enable it. What am I missing?

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: PIX with 2 HTTP Routes

Ok so if you wanted

static (inside,outside) 74.74.74.75 192.168.10.6 netmask 255.255.255.255 0 0

it appears you already have it!

My guess is it gave you a warning the first time you entered it, then you tried to enter it again and is giving you an error because it already exists.

7 REPLIES
Green

Re: PIX with 2 HTTP Routes

So you added...?

static (inside,outside) 74.74.74.75 192.168.10.6 netmask 255.255.255.255

If it says "INFO:..." it is just an information message, not an error.

New Member

Re: PIX with 2 HTTP Routes

I added:

static (inside,outside) 74.74.74.75 192.168.10.6 netmask 255.255.255.255 0 0

and I get this:

ERROR: static overlaps with 74.74.74.75 to 192.168.10.6

Green

Re: PIX with 2 HTTP Routes

What other statics do you have in place?

New Member

Re: PIX with 2 HTTP Routes

static (inside,outside) tcp interface 3389 192.168.6.9 3389 netmask 255.255.255.255 0 0

static (inside,outside) tcp interface telnet 192.168.1.201 telnet netmask 255.255.255.255 0 0

static (inside,outside) tcp 74.74.74.74 www 192.168.10.5 www netmask 255.255.255.255 0 0

static (inside,outside) tcp 74.74.74.74 https 192.168.10.5 https netmask 255.255.255.255 0 0

static (inside,outside) 74.74.74.74 192.168.10.5 netmask 255.255.255.255 0 0

static (inside,outside) 74.74.74.75 192.168.10.6 netmask 255.255.255.255 0 0

Green

Re: PIX with 2 HTTP Routes

You can't have both of these at the same time...

static (inside,outside) 74.94.136.137 192.168.10.6 netmask 255.255.255.255 0 0

static (inside,outside) 74.74.74.75 192.168.10.6 netmask 255.255.255.255 0 0

as they both have 192.168.10.6.

New Member

Re: PIX with 2 HTTP Routes

typo on my part!

that first line was from an older config and does not apply. I corrected it in my previous post.

Green

Re: PIX with 2 HTTP Routes

Ok so if you wanted

static (inside,outside) 74.74.74.75 192.168.10.6 netmask 255.255.255.255 0 0

it appears you already have it!

My guess is it gave you a warning the first time you entered it, then you tried to enter it again and is giving you an error because it already exists.

143
Views
4
Helpful
7
Replies