Hello all. I apologize, but I've posted this topic in the Wireless area as well as I'm not sure who would be best to respond. We're currently using the Cisco Wireless Lan Controller and I have setup a guest WLAN on it as well. My guest wan goes to a vlan that has a dsl modem on it and a pix. It works great in testing as far as plugging a pc in. However, with the WLC it is acting a DHCPRelay agent for the Wireless client and the PIX seems to either ignore it or does not know how to respond. Does anyone have suggestions on how to configure the PIX to resolve this issue? From TAC has told me in the past the WLC acts a dhcprelay agent sending a 'unicast' dhcp request direct toward the dhcp server, in this case the pix. I appreciate any help.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...