Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX501 VPN SETUP IS NOT Passing Traffic

I've setup a pix501 for remote access vpn using the cisco client and found some documentation on the setup and have done this before with no problems. I pasted my modified config into the pix with no problems and connected to it fine. it just doesnt want to pass any traffic. I thought it was a nat 0 issue and i cant prove it either way! Any help is appreciated attached is my complete configuration.

Thanks,

3 REPLIES
Green

Re: PIX501 VPN SETUP IS NOT Passing Traffic

try adding

isakmp nat-traversal

New Member

Re: PIX501 VPN SETUP IS NOT Passing Traffic

You were Right-On! Thanks,

I totally forgot that command.

Thanks,

Pat

Green

Re: PIX501 VPN SETUP IS NOT Passing Traffic

Good to hear.

please rate if it helped

96
Views
0
Helpful
3
Replies
CreatePlease login to create content