Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

PIX506E Backup

up anyone know the cmd line to back up my pix to a tftp server...

3 REPLIES
Community Member

Re: PIX506E Backup

First specify the server address and name of config file with the command;

tftp-server inside [tftp IP] /[filename]

Then when you want to backup the config just do a " wr net "

Community Member

Re: PIX506E Backup

a) To save the configuration on the TFTP server:

firewall(config)# tftp-server

firewall(config)# write net

For example:

firewall(config)# tftp-server inside 192.168.1.5 config.txt

firewall(config)# write net

b) To copy back the configuration to the ASA:

Before copying the configuration on the new ASA, set the same IP addresses of the

interfaces of the original ASA and also set the same TFTP server on the new ASA.

firewall(config)# tftp-server

firewall(config)# config net :

For example:

firewall(config)# tftp-server inside 192.168.1.5 config.txt

firewall(config)# config net :

Note: There must be a space between the word net and the colon (:)

Community Member

Re: PIX506E Backup

Consider the word ASA as pix here.

135
Views
0
Helpful
3
Replies
CreatePlease to create content