Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Pix515E 6.3.5 - Capturing VPN traffic on inside int ?

Quick question. I have a site - site tunnel that is up and running between a Pix 515E and a 3050 appliance.

Tunnel is up and running but on the pix side I dont see traffic from a couple of subnets behind the inside interface.

On the vpnallow access list there are no hits

So I setup a capture on the inside interface to see if the packets is making it to the inside interface and nothing.

There is some traffic making it thru the tunnel that would have to hit the inside int first and even that doesnt show

up in the capture.

Am I not able to capture inbound traffic to the inside int that is routed thru the VPN rule set ?

  • Firewalling

Pix515E 6.3.5 - Capturing VPN traffic on inside int ?

Hello Dclee,

Can you provide us the capture setup and also the traffic you are expecting to see.



Looking for some Networking Assistance? Contact me directly at I will fix your problem ASAP. Cheers, Julio Carvajal Segura
This widget could not be displayed.