Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

pix515e with two interfaces ?

I have a 515e only has two Ethernet interfaces, can I buy a ethernet module for two more interfaces? Does any license or IOS need upgrade?

Thanks

4 REPLIES

Re: pix515e with two interfaces ?

Rico,

Yes you can attach Ethernet module to it and there is not need for any license or upgrade.

Thanks,

~JG

Hall of Fame Super Blue

Re: pix515e with two interfaces ?

Hi

I'm not sure about v7.x but i know for sure that with 6.x it depends on the license you have.

With a restricted license you can run 3 10/100 fast ethernet interfaces only. So if you want to run 4 interfaces you are going to need an unrestricted license.

Alternatively you could look to use 802.1q trunks and create logical interfaces on your pix.

HTH

Jon

Silver

Re: pix515e with two interfaces ?

Hi,

There is no need to upgrade IOS, accept you required specific future.

Look: Fast Ethernet Expansion Options

On URL

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheet09186a0080091b15.html

Regards,

Dharmesh Purohit

Gold

Re: pix515e with two interfaces ?

keep in mind that one of the pci slots in the 515 might have a vac installed in it - giving you only one usable slot.

116
Views
0
Helpful
4
Replies
CreatePlease to create content