Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Policy Nat on ASA

I would like to configure multiple web servers on the DMZ using port 80. Can I use policy nat to translate a single Global IP Address to multiple Local IP Addresses? If yes, what is the proper commands for it?

Thanks,

1 REPLY

Re: Policy Nat on ASA

Yes you can, but you need to use different ports, Suppose you want to have two URL's , one on port 80 and other on port 81 to the global ip A.B.C.D, then configure like this

static (inside,Outside) tcp A.B.C.D 80 192.168.1.10 80

static (inside,Outside) tcp A.B.C.D 81 192.168.1.20 80

access-list out-in permit tcp any host A.B.C.D eq 80

access-list out-in permit tcp any host A.B.C.D eq 81

access-group out-in in interface Outside

143
Views
0
Helpful
1
Replies