Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Port Channel

hi

I have connectivity Cisco ASA 5585-x with Cisco 4500 switch and i want to ask can i make the ASA side redundant-interface and the 4500 switch side interface port-channel interface is that allowed or compatible ?

1 ACCEPTED SOLUTION

Accepted Solutions

That is not compatible.  You

That is not compatible.  You can, however, make the ASA side a portchannel and the 4500 switch a portchannel and this will work so long as both are using the same protocol (for example LACP).

--

Please remember to select a correct answer and rate helpful posts

--
Please remember to rate and select a correct answer
2 REPLIES

That is not compatible.  You

That is not compatible.  You can, however, make the ASA side a portchannel and the 4500 switch a portchannel and this will work so long as both are using the same protocol (for example LACP).

--

Please remember to select a correct answer and rate helpful posts

--
Please remember to rate and select a correct answer
Community Member

Hi,

Hi,

You can use ASA HA Cluster, with spanned etherchannel.

See the reference: http://www.cisco.com/c/en/us/td/docs/security/asa/asa95/configuration/general/asa-95-general-config/ha-cluster.pdf

Cheers.

95
Views
0
Helpful
2
Replies
CreatePlease to create content