Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Port Forwarding help for DVR system

Hello Folks,

I have a Cisco ASA 5505 and I just setup a DVR system at our office. Everything works fine inside where we can go directly to the IP address 10.11.15.90, but we would like to also be able to access it from the outside as well.

I am not to familiar on how to do this and would greatly appreciate some help.

Device IP is 10.11.15.90

Port is 6802

Please let me know if any additional information is required.

Thanks

  • Firewalling
3 REPLIES
Hall of Fame Super Blue

Port Forwarding help for DVR system

Additional information required -

1) what public IP do you want to present this as ie. the public IP on the outside interface or a separate public IP ?

2) what version of code are you running on your ASA

Jon

New Member

Re: Port Forwarding help for DVR system

Hi Jon,

1.) for the public ip just use x.x.x.x and I will put in the correct information.

2.)Currently running ASA Version 8.4(1)

Thanks for the help.

Port Forwarding help for DVR system

Just to not to repeat what's been said million times, if you have newer 8.4+ version of ASA, this link should explain everything to you, begining from part where website is made available to the outside users. Replace webserver with your DVR and port 80 with port 6802:

http://rowell.dionicio.net/configuring-nat-for-a-public-server-using-same-outside-interface/

424
Views
0
Helpful
3
Replies