Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Port Forwarding in ASA 5550

Hi Friend.

I have a Cisco 5550, it ASA has 2 internals IP address 172.16.6.150 and 172.16.6.152, the both ip address must have only 1 outside ip address 10.80.10.9, but the connections must be as the following. When many machines send traffic to the 10.80.10.9 into the udp ports 5060 until 5069 the traffic must finish in the 172.16.6.150, and When many machines send traffic to the 10.80.10.9 into the udp ports 32000 until 32999 the traffic must finish in the 172.16.6.152, How can I do that???, I can not make a port range with the static command. How can I solve this issue.

Regards

Rafael Barba

1 REPLY

Re: Port Forwarding in ASA 5550

Rafael,

I've never done this, but you can try this:

static (inside,outside) 10.80.10.9 access-list Range1

static (inside,outside) 10.80.10.9 access-list Range2

access-list Range1 permit udp host 172.16.6.150 any range 5060 5069

access-list Range2 permit udp host 172.16.6.152 any range 32000 32999

Here's another link:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=Firewalling&CommCmd=MB?cmd=pass_through&location=outline@^1@@.2cd2616a/6#selected_message

HTH,

John

HTH, John *** Please rate all useful posts ***
363
Views
0
Helpful
1
Replies
CreatePlease login to create content