Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Port re-direction on ASA 5505

I have set up port redirection on the ASA 5505 in the following way

static (inside,outside) tcp [global_ip] 80 [inside_ip] 80 netmask 255.255.255.255

static (inside,outside) tcp [global_ip] 25 [inside_ip] 25 netmask 255.255.255.255

static (inside,outside) tcp [global_ip] 443 [inside_ip] 443 netmask 255.255.255.255

and I have set up the appropriate ACL. But I see no traffic and this doesnt work.. it works fine if I use NAT rather than PAT.. also works fine on a ASA 5510

1 REPLY
Green

Re: Port re-direction on ASA 5505

Usually this is an issue when [inside_ip] = outside interface ip. If that is the case you must change [inside_ip] to the keyword "interface".

static (inside,outside) tcp interface 80 [inside_ip] 80 netmask 255.255.255.255

Is this the case?

275
Views
0
Helpful
1
Replies