02-12-2009 05:45 AM - edited 03-11-2019 07:49 AM
Good morning guys,
As the draw attached, I need to access the ASA 5520 on the outside port 3000 and redirect this connection to my server on the inside port 3000, How can I do that?
Thanks
Solved! Go to Solution.
02-12-2009 05:53 AM
static (inside,outside) tcp 200.200.200.200 3000 192.168.1.200 3000
or if 200.200.200.200 is the IP address on the outside interface of your ASA
static (inside,outside) tcp interface 3000 192.168.1.200 3000
Edit - you will obviously also need to allow traffic with acl eg.
access-list outside_in permit tcp any host 200.200.200.200 eq 3000
access-group outside_in in interface outside
Jon
02-12-2009 05:55 AM
access-list outside-in permit tcp any host 200.200.200.200 eq 3000
access-group outside-in in interface outside
static (inside,outside) tcp interface 3000 192.168.1.200 3000 netmask 255.255.255.255
HTH>
02-12-2009 05:53 AM
static (inside,outside) tcp 200.200.200.200 3000 192.168.1.200 3000
or if 200.200.200.200 is the IP address on the outside interface of your ASA
static (inside,outside) tcp interface 3000 192.168.1.200 3000
Edit - you will obviously also need to allow traffic with acl eg.
access-list outside_in permit tcp any host 200.200.200.200 eq 3000
access-group outside_in in interface outside
Jon
02-12-2009 07:04 AM
Thanks people
02-12-2009 05:55 AM
access-list outside-in permit tcp any host 200.200.200.200 eq 3000
access-group outside-in in interface outside
static (inside,outside) tcp interface 3000 192.168.1.200 3000 netmask 255.255.255.255
HTH>
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide