Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

port redirection

Good morning guys,

As the draw attached, I need to access the ASA 5520 on the outside port 3000 and redirect this connection to my server on the inside port 3000, How can I do that?

Thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Blue

Re: port redirection

static (inside,outside) tcp 200.200.200.200 3000 192.168.1.200 3000

or if 200.200.200.200 is the IP address on the outside interface of your ASA

static (inside,outside) tcp interface 3000 192.168.1.200 3000

Edit - you will obviously also need to allow traffic with acl eg.

access-list outside_in permit tcp any host 200.200.200.200 eq 3000

access-group outside_in in interface outside

Jon

Re: port redirection

access-list outside-in permit tcp any host 200.200.200.200 eq 3000

access-group outside-in in interface outside

static (inside,outside) tcp interface 3000 192.168.1.200 3000 netmask 255.255.255.255

HTH>

3 REPLIES
Hall of Fame Super Blue

Re: port redirection

static (inside,outside) tcp 200.200.200.200 3000 192.168.1.200 3000

or if 200.200.200.200 is the IP address on the outside interface of your ASA

static (inside,outside) tcp interface 3000 192.168.1.200 3000

Edit - you will obviously also need to allow traffic with acl eg.

access-list outside_in permit tcp any host 200.200.200.200 eq 3000

access-group outside_in in interface outside

Jon

New Member

Re: port redirection

Thanks people

Re: port redirection

access-list outside-in permit tcp any host 200.200.200.200 eq 3000

access-group outside-in in interface outside

static (inside,outside) tcp interface 3000 192.168.1.200 3000 netmask 255.255.255.255

HTH>

128
Views
0
Helpful
3
Replies