I would like to redirect the typical SQL port (1433) on my outside IP address to a specific address on the inside and at the same time, use a different port number. However, I must have something messed up in the config, as I can't make it happen. I chose a random port 7505/7506 on the outside as the port my clients would use to connect to the SQL server on the inside. I am not sure if I am doing this correctly, but would appreciate any help....thanks.
access-list outside_access_in permit tcp any host x.x.x.109 eq 7505
access-list outside_access_in permit tcp any host x.x.x.109 eq 7506
Ok, let me make sure I understand both replies. I only need to change the static statements that I originally listed with those that were posted. I don't need my originals and the posted ones...right? Since mine said static (outside,inside), and the reply showed static (indide,outside), I just want to make sure that I only needed the correction you folks provided. sorry for my ignorance.
Works Great! Thanks...one thing I noticed however, is that once I put these settings in, I can no longer ping the external address x.x.x.109 (from the outside). In addition to the STATIC entry redirecting the ports, can I have a standard entry just for translation of other traffic destined to the external address.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...