Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Ports open on PIX

Hi,

Can someone tell me the commands/access-lists on PIX to allow the below:

source: 10.10.2.3

destination: x.x.x.20

ports: 21,23,1530, 18102, 18103

Please give me the commands to run on PIX?

Regards,

Vin

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Ports open on PIX

Vinay,

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 21

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 23

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 1530

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18102

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18103

Regards,

Arul

*Pls rate if it helps*

1 REPLY
Cisco Employee

Re: Ports open on PIX

Vinay,

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 21

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 23

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 1530

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18102

access-list 150 permit tcp host 10.10.2.3 host x.x.x.20 eq 18103

Regards,

Arul

*Pls rate if it helps*

110
Views
0
Helpful
1
Replies