I have Cisco 3560X L3 Switch. We have done Inter VLAN in our internal networks. Below are the VLAN details
Default VLAN1 IP 192.168.125.2 (Gi0/1, Gi0/23, Gi0/24)
Interface Gi0/1 (Port Configure as a Trunk)
Interface VLAN 10 SERVERS_SW (Gi0/2 to 0/6)
IP Address: - 192.168.0.1 255.255.254.0
Interface VLAN 20 USERS_SW (Gi0/7 to 0/18)
IP Address: - 192.168.152.1 255.255.248.0
Interface VLAN 30 SPARE_SERVER_SW (Gi 0/19 to Gi 0/22)
IP Address: - 192.168.8.1 255.255.248.0
We have Sonicwall NSA2400 Firewall and we have setup Site-to-Site between our other offices who has Sonicwall TZ210 firewall. It works fine and they are able to access all the above networks.
Now the problem is we have one more site which uses Vigor Firewall (with Internal Network 192.168.100.0). We have setup the site-to-site vpn between Sonicwall NSA 2400 (Lets say SITE A) and Vigor (Lets say SITE B) but SITE A is unable to ping to SITE B Firewall but SITE B is able to *ONLY* SITE A firewall.
SITE A is trying to ping from User VLANs whose local ip is 192.168.152.0 range.
Can you please help us in above scenario to add route to 100.0 so that we will be able to ping and access SITE B networks.
Do you have a static route in your L3 for 192.168.100.0/24 pointing to your Sonic Wall? If yes, then this is fine. All I can think of is, either you've a Phase 1 or Phase 2 VPN issue between your Sonic Wall and Vigor FW.
Ramraj Sivagnanam Sivajanam
Technical Specialist/Service Delivery Manager – Managed Service Department
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...