problem using same-security-traffic permit intra-interface in inside Interf
I have a problem on using same-security-traffic permit intra-interface at ASA5505, although I enable "same-security-traffic permit intra-interface", the TCP connection still can't be built-up, but icmp is no problem.
I can't make the TCP connection from 10.8.103.100 to 10.8.111.103, but I can ping from 10.8.103.100 to 10.8.111.103, the routing should be no problem.
PC 10.13.1.10 can't configure subnet route for 192.168.1.0/24 via 10.13.1.201, only default route is configured to 10.13.1.254.
ip address 10.8.103.53 255.255.255.0 standby 10.8.103.54
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...