Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Problem with logging after upgrading to ASA 8.2

We have recently upgraded ASA to 8.2(1).

After upgrading we noticed that logging is not working, neither buffered nor traped.

Logging configuration is:

logging enable

logging timestamp

logging monitor warnings

logging buffered warnings

logging trap warnings

logging asdm warnings

logging queue 8192

logging device-id hostname

logging host INSIDE 1.1.1.1

logging class config trap warnings

An access-list example we use is:

access-lists test permit ip any any log warn

While hit counter increases, sh logg command is empty!!!!

Before upgrading (from 7.2(4)), logging was working correctly.

Any ideas?

1 REPLY
Community Member

Re: Problem with logging after upgrading to ASA 8.2

I found out that It's a well known bug (CSCsz73284). Even if you log warning level, it logs to informational.

To come around it, create a log list:

logging list log-list level warnings

logging list log-list message 106100

logging buffered log-list

logging trap log-list

211
Views
5
Helpful
1
Replies
CreatePlease to create content