11-28-2006 04:25 AM - edited 03-11-2019 02:01 AM
I have just upgraded my PIX 515 to 7.1.2 and now my VPN tunnels connect but they do not allow me to see any of my network. They worked fine with 6.3.3.
It seems to be either a routing issue or a ACL issue as I can create the tunnel but I cannot access/ping anything on my network.
Here is my sho isakmp sa.
Active SA: 4
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 4
1 IKE Peer: 78.179.155.21
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
2 IKE Peer: 33.64.128.21
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
3 IKE Peer: 43.57.209.21
Type : user Role : responder
Rekey : no State : AM_ACTIVE
4 IKE Peer: 111.34.145.21 Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
Thanks.
11-28-2006 04:29 AM
Your configuration, please!
11-28-2006 06:59 AM
I figured it out.
During the upgrade to 7.1 it removed my
nat (inside) 0 statement.
Now everything works fine.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: