Problems with Windows Server 2008 and static route on Pix
We have recently added two Windows Server 2008 to our existing network. We have an access list for mail and www going to a Windows 2003 Server with no problem. When I create the access list statement to open a specfic port 1153 on a separate Internet IP address and then add the static route to the Windows 2008 server, I loose Internet connection to that server.
Currently I have statements
access-list mailin permit tcp any host X.X.X.44 eq smtp access-list mailin permit tcp any host X.X.X.44 eq www
Re: Problems with Windows Server 2008 and static route on Pix
Are you asking why the static pat to the interface IP works but, the 1-1 static that you added to the x.x.x.45 IP address fails?
It could be because the upstream router is not sending taffic to the the firewall for that IP address as I mentioned earlier. Check with your ISP and ask them if they are sending traffic to the x.x.x.45 address towards the firewall.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...