Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

public ip in site to site vpn

Hi

I have lan range 10.x.x.x/24 Now I have natted with public ip.

In the site to site vpn how can i use for interseting traffic

can anyone guide me with an example

4 REPLIES

public ip in site to site vpn

Hi Prashant,

Question is not very clear what you are trying to achive ?

Thanks

Ajay

New Member

public ip in site to site vpn

Hi Ajay,

We want to create site to site vpn , lan range is 10..x.x.x.

The above range is geeting conflict with far end.

we are thinking to map the lan range with public ip 202.x.x.x

and share this ip as interseting traffic with far end.

Is it possible first , IF yes can u guide me.

public ip in site to site vpn

Hi Prashant,

Take a look on below mentioned link - Hope this help.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080b37d0b.shtml

Thanks

Ajay

New Member

public ip in site to site vpn

Hi Ajay,

here 10.x.x.x is the interseting trafiic , 202.x.x.x is public ip

access-list outside_2_cryptomap extended permit ip 10.x.x.x 255.0.0.0 192.168.x.x 255.0.0.0

access-list policynat extended pemit ip 10.x.x.x 255.0.0.0 192.168.x.x 255.0.0.0

static(inside,outside) 202.x.x.x acees-list policynat

Is the config correct

217
Views
0
Helpful
4
Replies
CreatePlease to create content